Skip to content
CertLabs

CompTIA Security+ · practice

Security Architecture (SY0-701) Practice Questions

Grounded in 3 sources

Key takeaways

  • Domain 3.0 (Security Architecture) makes up 18% of the SY0-701 exam.
  • Expect multiple‑choice and performance‑based items covering cloud, on‑premises, and hybrid models.
  • Key topics: zero‑trust, segmentation, secure communication, and control selection.
  • Use scenario‑based practice to master device placement, fail‑open/closed, and SASE concepts.

Overview & Exam Facts

The SY0-701 Security Architecture domain (Domain 3.0) covers 18% of the CompTIA Security+ exam and tests your ability to compare architecture models, apply security principles to enterprise infrastructure, and select effective controls for cloud, on‑premises, and hybrid environments. Mastery of concepts such as zero‑trust, segmentation, and secure communication protocols is essential for passing.

Security Architecture (SY0-701) Practice Questions

This section introduces the Security Architecture domain (Domain 3.0) which accounts for 18% of the SY0-701 exam (source: CompTIA Security+ (SY0-701) exam objectives). The exam contains a maximum of 90 questions, a mix of multiple‑choice and performance‑based items, and lasts 90 minutes. A passing score is 750 on a 100‑900 scale (source: CompTIA Security+ V7 (SY0-701, retiring version)). The English version retires June 11, 2027, with translated versions retiring August 13, 2027.

| Fact | Detail | Source | |------|--------|--------| | Domain weight | 18% of exam | (source: CompTIA Security+ (SY0-701) exam objectives) | | Total questions | Maximum 90 | | | Question types | Multiple‑choice & performance‑based | | | Exam length | 90 minutes | | | Passing score | 750 (100‑900 scale) | (source: CompTIA Security+ V7 (SY0-701, retiring version)) | | Retirement (English) | June 11, 2027 | | | Recommended experience | 2 years IT admin with security focus | |

Objective Breakdown (3.1–3.4)

The domain splits into four objectives, each with specific sub‑topics you must know:

3.1 Compare and contrast security implications of different architecture models

  • Cloud: responsibility matrix (IaaS/PaaS/SaaS), hybrid considerations, third‑party vendors, infrastructure as code (IaC), serverless, microservices, network infrastructure, containers
  • On‑premises: physical isolation, air‑gapped, logical segmentation
  • Zero Trust: control plane (Policy Engine, Policy Administrator), data plane (Policy Enforcement Point, implicit trust zones), policy enforcement, continuous verification
  • Network: SDN, SD‑WAN, SASE, edge computing

3.2 Apply security principles to secure enterprise infrastructure

  • Device placement: sensors, collectors, firewalls, proxies, VPN concentrators, load balancers, jump servers
  • Security zones: DMZ, intranet, extranet, management, wireless, guest, honeynet
  • Failure modes: fail‑open, fail‑closed
  • Network segmentation: physical, logical (VLAN, VRF), micro‑segmentation, SDN
  • Secure communication/access: VPN (IPsec, SSL/TLS), TLS, IPsec, SD‑WAN, SASE
  • Selection of effective controls: firewall types (NGFW, UTM, WAF, host‑based), IDS/IPS, DLP, NAC, endpoint protection

3.3 Compare and contrast concepts and strategies to protect data

  • Data states: at rest, in transit, in use
  • Data sovereignty, geolocation, data masking, tokenization, encryption (symmetric, asymmetric, homomorphic), key management, HSM, TPM, secure enclave
  • Data loss prevention (DLP): network, endpoint, cloud
  • Classification and labeling

3.4 Explain the importance of resilience and recovery in security architecture

  • High availability: clustering, load balancing, multipath, redundancy
  • Site considerations: hot, warm, cold, cloud-based recovery
  • Backup types: full, incremental, differential, snapshot
  • Replication: synchronous vs. asynchronous
  • Power: UPS, generator, PDU
  • Testing: tabletop, failover, simulation

This material is independent exam‑preparation content and is not affiliated with, authorized by, or endorsed by CompTIA.

Representative Question Styles & Worked Reasoning

Representative Question Styles & Worked Reasoning

The SY0-701 exam uses two primary item formats: traditional multiple‑choice (single‑answer and multiple‑answer) and performance‑based questions (PBQs) that simulate a console or network diagram. In the Security Architecture domain you will frequently see:

  1. Scenario‑based multiple‑choice – A short narrative describes a hybrid cloud deployment with a responsibility matrix. You must pick the correct control (e.g., a Web Application Firewall for Layer 7 protection) from four options. The key is to map each requirement to the control type listed in objective 3.2 (firewall types, VPN, SASE) (source: CompTIA Security+ (SY0-701) exam objectives).
  2. Drag‑and‑drop architecture mapping – You are given a list of components (jump server, proxy, IDS/IPS, load balancer) and a network diagram with zones (DMZ, internal, management). You must place each component in the correct zone. Remember that a jump server belongs in the management zone, while an IDS/IPS is typically inline in the DMZ.
  3. Performance‑based lab – A simulated firewall console asks you to create a rule that allows TLS‑encrypted traffic to a serverless function while blocking all other inbound ports. The correct steps: select “Add Rule”, set source “Any”, destination “Serverless‑App”, service “HTTPS (443)”, action “Allow”, then add a default deny rule. This mirrors the “Secure communication/access” bullet (VPN, TLS, IPSec, SD‑WAN, SASE).
  4. Hot‑area / click‑to‑configure – A cloud console screenshot asks you to enable encryption at rest for an S3 bucket, configure a bucket policy for least privilege, and turn on versioning. This tests objective 3.3 (data states, encryption, classification).

Worked example: Question: “An organization uses a hybrid model with on‑premises data centers and a public cloud provider. They need to enforce consistent segmentation across both environments. Which architecture concept best supports this requirement?” Reasoning: The objective lists “Logical segmentation” and “Software‑defined networking (SDN)” under architecture models (source: CompTIA Security+ (SY0-701) exam objectives). SDN enables centralized policy enforcement across physical and virtual networks, making it the correct answer. Distractors like “Air‑gapped” or “Physical isolation” only apply to isolated networks, not hybrid segmentation.

Second worked example (PBQ): Task: “Configure a zero‑trust policy engine to allow access to a finance application only from managed devices with up‑to‑date EDR.” Steps: In the simulated policy console, create a new policy → name “Finance‑App‑Access” → add condition “Device posture = compliant (EDR active, OS patched)” → add condition “User group = Finance” → set action “Allow” → attach policy to the Policy Enforcement Point (PEP) fronting the finance app. This directly maps to objective 3.1 Zero Trust control plane / data plane components.

Practice tip: When reviewing PBQs, first identify the objective (e.g., 3.2 “apply security principles to secure enterprise infrastructure”) then locate the relevant control list (device placement, security zones, fail‑open/closed). This reduces guesswork and speeds up lab completion.

Common Traps & How to Avoid Them

Common Traps & How to Avoid Them

  1. Confusing responsibility matrix with shared responsibility – The exam may ask who owns patching for a PaaS database. The cloud provider patches the underlying OS; the customer patches the application. Remember the “Responsibility matrix” bullet under cloud concepts (source: CompTIA Security+ (SY0-701) exam objectives).
  2. Mixing fail‑open and fail‑closed – A question might describe a firewall that stops traffic when it loses power. That is fail‑closed (default deny). Fail‑open would allow traffic. Memorize the definitions under “Failure modes”.
  3. Overlooking zero‑trust components – Zero Trust appears in both General Security Concepts (1.2) and Architecture (3.1). In Architecture, focus on the Control Plane (Policy Engine, Policy Administrator) and Data Plane (Policy Enforcement Point, Implicit trust zones). Do not select “VPN” as a zero‑trust control; VPN is a secure communication method, not a zero‑trust principle.
  4. Selecting the wrong firewall type – NGFW provides application‑layer inspection, UTM bundles multiple services, WAF protects web apps. Match the scenario: if the requirement is “inspect SQL injection payloads”, choose WAF; if “integrated antivirus, IPS, URL filtering”, choose UTM.
  5. Ignoring scalability and cost considerations – The “Considerations” list (availability, resilience, cost, responsiveness, scalability, ease of deployment, risk transference, ease of recovery, patch availability, inability to patch, power, compute) is often the basis for “best fit” questions. When asked to choose an architecture for a startup with limited budget, favor “Serverless” or “Containerization” over “On‑premises” because of lower capital expense and easier scaling.
  6. Misplacing devices in security zones – A jump server (bastion host) belongs in the management zone, not the DMZ. An inline IDS/IPS sits in the DMZ or between zones. A load balancer typically resides in the DMZ or public zone. Memorize the standard zone‑device mapping from objective 3.2.
  7. Confusing SD‑WAN with SASE – SD‑WAN optimizes WAN traffic routing; SASE converges networking and security (SWG, CASB, ZTNA, FWaaS) into a cloud‑delivered service. If the scenario mentions “security stack delivered from the cloud”, choose SASE.
  8. Over‑encrypting data in use – Homomorphic encryption allows computation on ciphertext, but it’s not yet practical for most workloads. For “data in use” protection, the exam expects “secure enclave” (TEE, SGX) or “confidential computing”, not homomorphic encryption.

Avoidance strategy: Create a two‑column cheat sheet mapping each objective bullet to a keyword. During practice, highlight the keyword in the question stem, then match it to the cheat sheet. This reduces reliance on memory and prevents the traps above.

Put the concepts into practiceReview course access

Study Tips, Resources & Next Steps

Study Tips, Resources & Next Steps

  1. Domain‑focused practice – Allocate study time proportional to the 18% weight. Use the official CompTIA CertMaster Practice for SY0-701 to get timed PBQs that mirror the exam environment (source: CompTIA Security+ V7 (SY0-701, retiring version)).
  2. Hands‑on labs – Build a small hybrid lab: a virtual router (e.g., VyOS) for SDN, a cloud free tier (AWS/Azure) for serverless functions, and an on‑premises VM for a jump server. Configure segmentation (VLANs, micro‑segmentation with Calico), TLS tunnels (OpenVPN or WireGuard), and a WAF rule (ModSecurity on NGINX). This directly reinforces objectives 3.1 and 3.2 (source: CompTIA Security+ (SY0-701) exam objectives).
  3. Review the responsibility matrix – Create a table listing service models (IaaS, PaaS, SaaS) versus security tasks (patch OS, configure firewall, manage identity, encrypt data, configure logging). Memorize the split; it appears in multiple‑choice items.
  4. Flashcards for failure modes & device attributes – Terms like “inline vs. tap/monitor”, “active vs. passive”, “fail‑open vs. fail‑closed”, “stateful vs. stateless inspection” are high‑yield. Use spaced‑repetition software (Anki, Quizlet).
  5. Schedule a full‑length practice exam – Two weeks before the test, take a 90‑minute, 90‑question simulation. Review every incorrect answer against the objective list.
  6. Leverage the Certification Guide hub – For a structured roadmap, visit the Certification Guide page which outlines all five domains, recommended study order, and links to official resources.
  7. Deep‑dive on Zero Trust – Read the NIST SP 800‑207 Zero Trust Architecture publication. Map each component (PE, PA, PEP, IdP, SIEM) to the SY0‑701 3.1 bullets. Practice explaining the difference between “implicit trust zones” and “explicit verification”.
  8. Practice IaC security scanning – Use a free tool (Checkov, tfsec) on a sample Terraform template that deploys an S3 bucket, security group, and Lambda. Identify misconfigurations (public bucket, overly permissive SG). This reinforces objective 3.1 “infrastructure as code” and 3.3 “data protection”.

Next step: after mastering Security Architecture, move to Domain 4.0 Security Operations (28% weight) to maximize overall score. Consistent, scenario‑driven practice is the most reliable path to passing SY0-701.

Frequently asked questions

What percentage of the SY0-701 exam covers Security Architecture?

Security Architecture (Domain 3.0) accounts for 18% of the SY0-701 exam according to the official objectives (source: CompTIA Security+ (SY0-701) exam objectives).

How many questions are on the SY0-701 exam and what types are used?

The exam has a maximum of 90 questions, mixing multiple‑choice and performance‑based items, and lasts 90 minutes (source: CompTIA Security+ (SY0-701) exam objectives).

What is the passing score for SY0-701?

A score of 750 on a 100‑900 scale is required to pass the SY0-701 exam (source: CompTIA Security+ V7 (SY0-701, retiring version)).

When does the English version of SY0-701 retire?

The English exam retires on June 11, 2027; translated versions retire on August 13, 2027 (source: CompTIA Security+ V7 (SY0-701, retiring version)).

Which architecture concepts are emphasized in the Security Architecture domain?

Key concepts include cloud responsibility matrix, hybrid considerations, IaC, serverless, microservices, network segmentation (physical, logical, SDN), zero‑trust control and data planes, device placement, security zones, fail‑open/closed, and secure communication methods such as VPN, TLS, IPSec, SD‑WAN, and SASE (source: CompTIA Security+ (SY0-701) exam objectives).

Sources and review

Source links checked 2026-11-20. These exercises are independent CertLabs preparation, not official exam questions or a prediction of passing.

Continue exploring